Pneumatic Spray Gun With Small Volume But High Atomization Technology

Product Description

H2000 H.V.L.P.

I. Product Overview

The H-2000 spray gun adopts high atomisation technology. It is small in size and light in weight, and is suitable for fine repair and diverse spraying scenarios. Its design emphasises operational comfort and is equipped with three independent control knobs (air intake volume, oil output volume, and spraying area), facilitating precise adjustment of the spraying effect. The transparent paint cans (with capacities of 100ml and 250ml) allow for real-time observation of the remaining paint volume, enhancing operational convenience.

Ii. Technical Parameters

Iii. Application Fields

H-2000 is widely applicable to:

1.Automotive industry: Automotive coating, touch-up painting, and color painting.

2.Furniture and Architecture: Furniture surface repair, wall painting.

3.Art and Craftsmanship: Model making, ceramic piping, nail art painting.

4.Industrial spraying: photocatalyst spraying, chemical spraying, etc.

Iv. Key Points for Use and Maintenance

1.Operation adjustment:

The atomisation effect is controlled by adjusting the air cap, nozzle and needle valve (the fineness of atomized particles is determined by the number of auxiliary measurement holes).

When spraying, keep the spray gun perpendicular to the surface, move it at a constant speed, and control the distance at about 200mm to avoid sagging or dry spraying.

2.Daily maintenance:

Clean immediately after use to prevent the paint from blocking the channels (especially for two-component paints). It is recommended to use special tools when disassembling and cleaning the air cap and nozzle.

Regularly lubricate components such as needle valves and springs to prevent rust or air leakage.

When the equipment is not in use for a short time, the tip of the gun can be immersed in the solvent, but avoid immersing the entire gun to prevent damage to the sealing ring.

V. Precautions

Spraying environment: It is recommended to have a temperature of 22-23℃ and a humidity of 50-65%. Avoid excessive temperature causing the solvent to evaporate too quickly or excessive humidity causing the coating to turn white.

Paint compatibility: The dilution ratio should be adjusted according to the viscosity of the paint. If the viscosity is too high, it may lead to uneven atomization; if it is too low, sagging may occur.

FAQ

Question 1: What is the H2000 spray gun most suitable for?

A1:The H2000 spray gun is most suitable for the following scenarios:

Car repair: The H2000 spray gun is available in multiple diameters. The small-diameter spray gun can precisely control the paint output and spraying range, making it suitable for small local area repairs and scratch repair of cars. It can prevent the paint from being sprayed on unnecessary areas and ensure that the paint surface at the repair area is fine, smooth, and better blends with the original car paint.

Vacuum coating: In the vacuum coating process, the coating material needs to be evenly sprayed onto the surface of the object in extremely fine particles. The atomization effect of the H2000 spray gun is relatively good. It can fully atomize the coating material, enabling it to better adhere to the surface of the object in a vacuum environment and form a uniform and dense coating layer.

Formaldehyde removal: The formaldehyde-removing agent can be evenly sprayed onto the surfaces of objects that need formaldehyde treatment through the H2000 spray gun, such as furniture and walls. Its small-diameter design enables the atomization of the agent to be fine, increases the contact area between the agent and the surface of the object, and enhances the effect of formaldehyde removal.

Mousse cake making: When making mousse cakes and other desserts, the H2000 spray gun can be used to spray chocolate sauce, fruit jam and other sauces in a fine mist on the surface of the cake for decoration and seasoning. The small-caliber spray gun can precisely control the spray volume and spraying range of the sauce, creating exquisite patterns and decorative effects.

Q2: What are the preparations for the H2000 spray gun?

A2:Preparatory work

1.Select the appropriate paint or coating and dilute it as needed to ensure its viscosity is suitable for spraying.

2.Wear protective equipment such as masks, gloves and goggles, etc.

3.Connect the spray gun to the air source and ensure that the air pressure remains stable within an appropriate range, typically 2 to 3 bar. At the same time, check whether all the components of the spray gun are installed firmly, especially the vulnerable parts such as the nozzle and the gun needle.

Q3: How to adjust the H2000 spray gun in daily work?

A3:Adjust the spray gun

1.Air pressure adjustment: Adjust the air pressure to an appropriate value through the air pressure adjustment knob on the spray gun. Excessive air pressure may cause the paint to splash, while too low air pressure will affect the atomization effect.

2.Paint volume adjustment: Rotate the paint volume adjustment knob on the spray gun to adjust the paint output as needed. Generally speaking, at the beginning, the amount of paint can be reduced, and then gradually increased according to the actual spraying situation.

3.Spray shape adjustment: By adjusting the spray shape adjustment knob on the spray gun, the spray shape can be adjusted to circular, oval or fan-shaped, etc. According to different spraying objects and requirements, select the appropriate spray shape.

Q4: How do beginners use the H2000 spray gun?

A4:Spraying operation

1.Hold the spray gun and keep it perpendicular to the surface to be sprayed, with a distance of approximately 15 to 30 centimeters.

2.Press the trigger of the spray gun and start spraying. During the spraying process, it is necessary to maintain the stable movement of the spray gun at a uniform speed and avoid pauses or excessive movement.

3.For large-scale spraying, the overlapping spraying method can be adopted. The width of each spray should be approximately half of the width of the spray shape to ensure a uniform paint surface.

4.If multiple layers of spraying are required, wait for the previous layer of paint to dry before proceeding with the next spraying.

Q5: How to clean and maintain the H2000 spray gun after use?

A5:Cleaning and maintenance

1.After the spraying is completed, immediately clean the spray gun with a solvent to remove any remaining paint inside the gun to prevent clogging of the nozzle and gun needle.

2.Disassemble the main components of the spray gun, such as the nozzle, gun needle, paint cup, etc., and thoroughly clean them. Special spray gun cleaning tools such as brushes and pins can be used.

After cleaning, dry the components of the spray gun and reassemble them. When storing the spray gun, it should be placed in a dry and well-ventilated area to avoid collision and damage to the spray gun.