Pneumatic Spray Guns That Focus On Appearance Design And Functional Optimization

Product Description

2008 H.V.L.P.

I. Product Overview

The 2008 spray gun is a pneumatic spraying tool that focuses on both appearance design and functional optimization. The core of the design lies in the streamlined gun body and ergonomic grip structure, which combines aesthetics and operational comfort.

Ii. Core Design Features

1.Appearance and structure

Streamlined gun body: The patented design emphasizes smooth lines on the gun body, reducing operational resistance and enhancing grip stability.

Lightweight materials: Made of lightweight materials such as aluminum alloy, it reduces the overall weight and is suitable for long-term operation.

Modular components: Combined with the company's other patented technologies (such as integrated spray gun cans and adjustable air intake connectors), it supports quick disassembly, assembly and maintenance.

2.Function optimization

Enhanced sealing performance: Adopting a multi-stage sealing ring design (such as a four-stage sealing valve structure) reduces air and paint leakage, thereby extending service life.

Low-pressure adaptability: Equipped with a flow cap nozzle assembly, it optimizes atomization effect and supports efficient spraying in low-pressure environments.

Adjustment flexibility: Equipped with a pressure adjustment knob and a paint flow control valve, it can meet different spraying requirements.

Iii.Application Scenarios

Car repair: Suitable for small-scale touch-up painting and detailed spraying.

Furniture coating: Uniform coverage of wood lacquer and metal lacquer.

Industrial spraying: Fine operations such as photocatalyst and anti-corrosion coating.

FAQS:

QuestionA : How to maintain my 2008 spray gun?

Answer A: Key Points for Use and Maintenance

1.Operating norms

When spraying, keep a vertical distance (it is recommended to be 15-20cm), and move at a constant speed to avoid sagging.

Before use, check the condition of the needle valve and the sealing ring to ensure there is no leakage.

2.Maintenance suggestions

Timely cleaning: Thoroughly clean the paint passage after each use to prevent blockage (especially for two-component paints).

Regular lubrication: Apply lubricating oil to moving parts such as ejector pins and springs to prevent rust and jamming.

Storage precautions: When not in use for a short time, the gun tip can be soaked in a solvent, but avoid soaking the entire gun to prevent damage to the sealing ring.

Question B: Why did the 2008 spray gun leak material? How to deal with it?

Answer B: The causes and treatment methods of material leakage from the 2008 spray gun are as follows:

1.The sealing ring ages.

Reason: The sealing ring will age or get damaged after long-term use, causing the coating to leak.

Solution: Regularly inspect the condition of the sealing ring and replace it in a timely manner if any problems are found.

2.The spray gun is improperly assembled

Reason: During installation, the components were not correctly aligned and the joints were not tight.

Treatment method: Reassemble the spray gun to ensure that the components are aligned and the seams are tight.

3.The coating pressure is too high.

Reason: The working pressure of the coating exceeds the range that the spray gun can withstand.

Solution: According to the requirements of the spray gun, adjust the pressure to an appropriate value using a pressure regulator.

4.There is a foreign object at the nozzle

Reason: The nozzle is clogged with coating residues or impurities and cannot be completely locked.

Treatment method: Manually clean the nozzle with a solvent and a brush or pipette. You can also fill it with a cleaning agent or water to increase the material pressure and trigger the spray gun to expel foreign objects.

5.The position of the needle adjustment screw is improper

Reason: The needle adjustment screw was rotated backward too much, and the needle tip was too far away, causing a small amount of material to flow out around the needle tip.

Treatment method: Inspect the front part of the spray gun to ensure the needle is flush with the nozzle, and then tighten the needle adjustment screw.

6.Wear of the needle spring

Reason: After the needle spring wears out, it cannot fully push the needle forward, leaving a gap for the material to pass through.

Treatment method: Replace the needle spring.

7.The needle/nozzle is worn or damaged

Reason: As a vulnerable part, it will wear out or get damaged after long-term use.

Treatment method: If the above methods are ineffective, the needle/nozzle needs to be replaced.

Hot Tags: professional hvlp spray gun with 3 nozzle, China, suppliers, manufacturers, customized, wholesale, free sample, HVLP Gravity Feed Air Spray Gun, High Pressure Spray Gun, Electric Spray Gun, Texture Paint Spray Guns, HVLP Spray Gun, HVLP Air Spray Gun